PolyCalc

Rolling Cylinder on an Incline (Work-Energy)

A rigid body rolling without slipping carries both translational and rotational kinetic energy. Use conservation of energy to find its speed at the bottom of an incline.

r = 0.30 mL = 6.0 m along slopeh = 2.05 m20°vω

Problem

A 40 kg solid uniform cylinder of radius 0.30 m is released from rest and rolls without slipping 6.0 m down a 20° incline. Use g = 9.81 m/s².

The speed of its center at the bottom is most nearly:

  1. 4.5 m/s
  2. 5.2 m/s
  3. 6.3 m/s
  4. 8.9 m/s

Answer

Show steps

Given

  • ,
  • along the slope,
  • Starts from rest, rolls without slipping

Step 1: Vertical drop

Gravity does work through the vertical drop, not the slope length:

Step 2: Rolling constraint and inertia

Step 3: Energy balance

Static friction does no work when the cylinder rolls without slipping, so mechanical energy is conserved:

The mass and the radius cancel.

Step 4: Solve for the speed

Energy check:

Concept

For a rigid body, kinetic energy is for the center-of-mass motion plus for rotation about the center.

  • Rolling without slipping links the two: .
  • The contact point is momentarily at rest, so static friction does no work.
  • Solid cylinder ; hoop ; solid sphere .

Related: the work, energy and power lesson and the Dynamics topic page.

Key Formulas

Notation: = vertical drop, = mass moment of inertia about the center, = angular speed, = radius.

Common Mistakes

  • (A) 4.5 m/s: using the hoop inertia I = mr² (v = √(gh)).
  • (C) 6.3 m/s: forgetting the rotational kinetic energy (v = √(2gh)). Part of the energy goes into spinning.
  • (D) 8.9 m/s: using the 6.0 m slope length as the height instead of the vertical drop.
  • Using the solid sphere inertia (2/5)mr², which would give 5.36 m/s.
  • Adding a friction work term: static friction does no work when the body rolls without slipping.