PolyCalc

Traverse Area by DMD Example

Convert traverse bearings and distances to latitudes and departures, then find the enclosed area.

NABCDN 78°00′ E, 150.00 ftS 12°00′ E130.00 ftS 70°00′ W, 119.99 ftN 24°00′ W149.98 ftArea = ?

Sketch is not to scale.

Problem

A closed four-sided traverse ABCD was measured as shown. The field data have already been balanced, so the latitudes and departures (rounded to 0.01 ft) close exactly. Side lengths are horizontal distances in feet.

SideBearingLength (ft)
ABN 78°00′ E150.00
BCS 12°00′ E130.00
CDS 70°00′ W119.99
DAN 24°00′ W149.98

The area enclosed by the traverse is most nearly:

  1. 12,800 ft²
  2. 20,500 ft²
  3. 18,700 ft²
  4. 37,500 ft²

Answer

Show steps

Given

  • Closed traverse A-B-C-D-A, traversed clockwise
  • Bearings and horizontal lengths as tabulated
  • Data balanced:

Method 1, step 1: Latitudes and departures

Method 1, step 2: Double meridian distances

Start with the first side's departure, then add the previous DMD, the previous departure and the current departure. The last DMD must equal the last departure with its sign reversed, which is a quick check.

Method 1, step 3: Double area, then area

The sum is negative here only because the traverse runs clockwise with this sign convention; the area is the absolute value.

Method 2 (check): Coordinates and the shoelace formula

Put A at the origin and accumulate departures (east) and latitudes (north):

Both methods give 18,726 ft², which selects choice C.

Concept

Each traverse side projects onto the north-south axis (its latitude) and the east-west axis (its departure). For a closed traverse, both sums are zero after adjustment.

  • Use the angle measured from the north or south end of the meridian: latitude uses cosine, departure uses sine.
  • The double meridian distance (DMD) of a side is twice the east-west distance from its midpoint to a reference meridian. Any consistent reference meridian gives the same area.
  • Multiplying each DMD by that side's latitude gives double area contributions. The sum must be halved.

Key Formulas

Notation: L = horizontal length, α = bearing angle from the N or S end of the meridian, Lat = latitude (north positive), Dep = departure (east positive), DMD = double meridian distance.

Common Mistakes

  • (A) 12,800 ft²: swapping sine and cosine (latitude = L sin α, departure = L cos α). The traverse then does not close, which is the warning sign.
  • (B) 20,500 ft²: reversing the sign of one departure (BC taken as west). The DMDs and the area are then wrong, and the traverse no longer closes.
  • (D) 37,500 ft²: forgetting to divide by 2. The DMD method produces double the area.