Greenshields Capacity from Field Data
Greenshields assumes speed falls linearly as density rises. Two field observations fix the line, and the line gives free-flow speed, jam density and capacity.
Problem
Speed-density data on one lane of a highway follow the Greenshields linear model. Two field observations: a density of 32 veh/mi/ln at a space-mean speed of 52 mph, and a density of 96 veh/mi/ln at 26 mph. The capacity of the lane is most nearly:
- 1,660 veh/h/ln
- 2,500 veh/h/ln
- 2,600 veh/h/ln
- 5,200 veh/h/ln
Answer
Show stepsHide steps
Given
- Point 1: k = 32 veh/mi/ln, v = 52 mph
- Point 2: k = 96 veh/mi/ln, v = 26 mph
- Linear (Greenshields) speed-density model
Step 1: Slope of the speed-density line
Step 2: Free-flow speed and jam density
Free-flow speed is the speed at zero density (the intercept). Jam density is where the line reaches zero speed.
Step 3: Capacity
Follow-up: why the observed flows are lower
Both are below 2,600. The second point is on the congested side (k greater than 80), so it carries less flow than capacity despite the higher density.
Concept
With the linear model , flow is a parabola in density:
- Two points on the line give the slope, then (intercept at ) and (where ).
- Flow peaks at half the jam density and half the free-flow speed.
- Capacity is the peak of that parabola, not any flow you happened to observe.
Related: the traffic capacity and flow theory lesson and the Transportation Engineering topic page.
Key Formulas
Notation: v_f = free-flow speed (mph), k_j = jam density (veh/mi/ln), q_max = capacity (veh/h/ln), reached at k = k_j/2 and v = v_f/2.
Common Mistakes
- Taking an observed flow as capacity: (A) 1,664 is the flow at the first observation and (B) 2,496 is the larger observed flow. Neither is the peak of the curve.
- (D) 5,200 veh/h/ln: using v_f·k_j/2 instead of v_f·k_j/4.
- Mixing time-mean speed with space-mean speed in q = vk. Use space-mean speed.
- Finding k_j from one point only. Two points are needed to get the slope and the intercept.