PolyCalc

Horizontal Curve Stationing Example

Locate the start (PC) and end (PT) of a simple circular curve from the PI station, the radius and the intersection angle.

OR = 1,200 ftI = 40°I = 40°PCPISta. 32+50.00PT = ?TTL (arc)stationing increases

Problem

Two tangents of a highway meet at a PI located at station 32+50.00. The forward tangent deflects 40° to the right of the back tangent. The tangents are joined by a simple circular curve with a radius of 1,200 ft. Stations are in feet (1 station = 100 ft).

The station of the PT is most nearly:

  1. 28+13.24
  2. 36+34.08
  3. 36+50.99
  4. 36+86.76

Answer

Show steps

Given

  • PI at station 32+50.00 (= 3,250.00 ft)
  • Intersection angle
  • Radius

Method 1, step 1: Tangent length and curve length

Method 1, step 2: PC station

Back up from the PI along the back tangent by the tangent length:

Method 1, step 3: PT station

Go forward from the PC along the curve by the arc length:

Method 2 (check): Degree of curve (arc definition)

The degree of curve is the central angle that subtends 100 ft of arc. The curve length is then 100 ft for every degrees of :

Both methods give the same result.

Concept

A simple horizontal curve is a circular arc joining two straight tangents that meet at the PI (point of intersection). The curve starts at the PC and ends at the PT.

  • The tangent length is the distance from the PC to the PI (and from the PI to the PT) along the tangents.
  • The intersection angle (the deflection between the tangents) equals the central angle of the arc.
  • Stations are measured along the road as built, so the PT station is the PC station plus the arc length , not the PI station plus .

See the Horizontal Curves (circular curve) formulas in the Transportation section of the NCEES FE Reference Handbook.

Key Formulas

Notation: = radius, = intersection (central) angle, = tangent length, = length of curve (arc), = degree of curve (arc definition).

Common Mistakes

  • (A) 28+13.24: this is the PC station, the start of the curve, not the PT.
  • (B) 36+34.08: adding the long chord (2R sin(I/2) = 820.85 ft) to the PC instead of the arc length.
  • (D) 36+86.76: adding the tangent length to the PI. The PT is measured along the curve from the PC, which is shorter than going PC to PI to PT along the tangents.