PolyCalc

Stopping Sight Distance

Stopping sight distance is the distance a driver needs to see an object and brake to a stop: the distance traveled during perception-reaction plus the braking distance.

Problem

A two-lane rural highway has a design speed of 60 mph on a level grade. Using AASHTO values (perception-reaction time of 2.5 s and a deceleration rate of 11.2 ft/s²), the stopping sight distance is most nearly:

  1. 220 ft
  2. 345 ft
  3. 570 ft
  4. 820 ft

Answer

Show steps

Given

  • V = 60 mph
  • t = 2.5 s
  • a = 11.2 ft/s²
  • Level grade (G = 0)

Step 1: Reaction distance

Step 2: Braking distance

Step 3: Add them

AASHTO rounds up to 570 ft for a 60 mph design speed.

Follow-up: on a 3% downgrade

Gravity works against braking on a downgrade, so the stopping distance grows by about 30 ft compared with the level road.

Concept

With speed in mph, perception-reaction time in seconds and deceleration in ft/s², the AASHTO stopping sight distance on a level grade is:

  • Reaction distance: the car keeps its speed for seconds, ft.
  • Braking distance: ft.
  • On a grade (decimal), use the general form below, with for upgrades and for downgrades.

Key Formulas

Notation: V = design speed (mph), t = perception-reaction time (s), a = deceleration (ft/s²), G = grade (decimal, negative downhill). Result is in feet.

Common Mistakes

  • (A) 220 ft: using only the reaction distance and forgetting the braking distance.
  • (B) 345 ft: using only the braking distance and forgetting the distance traveled during perception-reaction.
  • (D) 820 ft: computing braking distance as V²/(30f) with an old friction factor of f = 0.20 (600 ft) instead of the AASHTO deceleration of 11.2 ft/s², then adding the 220 ft reaction distance.