PolyCalc

Aggregate Moisture Correction Example

The mix was designed with SSD aggregates, but the stockpiles are wetter. Find how much water to add at the plant per cubic meter.

Design mix per m³ and stockpile conditions
Water (design)175 kg
Cement389 kg
Coarse aggregate (SSD)1,000 kg
Fine aggregate (SSD)700 kg
Coarse: total moisture / absorption1.5% / 0.5%
Fine: total moisture / absorption5.0% / 1.2%

Problem

A concrete mix is designed per cubic meter with SSD aggregates: water 175 kg, cement 389 kg, coarse aggregate 1,000 kg, fine aggregate 700 kg. In the stockpile the coarse aggregate has total moisture 1.5% and absorption 0.5%; the fine aggregate has total moisture 5.0% and absorption 1.2% (both on oven-dry mass). The water to add at the plant per cubic meter is most nearly:

  1. 125 kg
  2. 139 kg
  3. 149 kg
  4. 211 kg

Answer

Show steps

Given

  • Design water = 175 kg, cement = 389 kg (unchanged)
  • Coarse: 1,000 kg SSD, MC = 1.5%, A = 0.5%
  • Fine: 700 kg SSD, MC = 5.0%, A = 1.2%

Step 1: Oven-dry mass of each aggregate

SSD mass is the dry mass plus the absorbed water, so divide by (1 + A).

Step 2: Free water carried by the aggregates

Only moisture above absorption is free water that counts toward the mix:

Step 3: Batch water

Most nearly 139 kg.

Check: Wet batch masses of the aggregates

The aggregates are weighed wet, so their batch masses rise by the same water the mixer water drops by. Cement stays at 389 kg.

Concept

Moisture correction keeps the effective water in the mix equal to the design water. Aggregates wetter than SSD add water to the mix; aggregates drier than SSD would take water from it.

  • Absorbed water is inside the particles and does not count; free water on the surface does.
  • Wet aggregate: subtract the free water from the mixer water and add it to the aggregate weights.
  • Moisture contents and absorption are expressed on oven-dry mass.

Applying the percentages straight to the SSD masses gives 138.4 kg, close enough on the exam, but the exact way uses oven-dry mass.

Related: effective stress example and the Materials topic page.

Key Formulas

Notation: = absorption, MC = total moisture content, SSD = saturated surface dry, OD = oven dry.

Common Mistakes

  • (A) 125 kg: subtracting the total moisture instead of only the moisture above absorption.
  • (C) 149 kg: correcting the fine aggregate only and forgetting the coarse aggregate.
  • (D) 211 kg: adding the free water instead of subtracting it.
  • Forgetting to raise the aggregate batch masses by the same water that was taken out of the mixer water.