FE Exam Pass Rate
NCEES-published pass rates by discipline, updated July 2026
The FE Civil pass rate is 66% and FE pass rates across all seven disciplines run from 61% to 73%, according to NCEES. These numbers are for first-time takers who studied at an EAC/ABET-accredited program and took the exam within 12 months of graduating. About one in three of them fails, so the FE is very passable but not a formality.
See the source on ncees.orgFE pass rates by discipline
NCEES posts pass rates twice a year: in July for the January–June testing population and in January for July–December. The table below is the July 2026 update, copied from the NCEES FE exam page (checked October 27, 2026).
| Exam | Examinees | Pass rate |
|---|---|---|
| FE Chemical | 743 | 68% |
| FE Civil | 6,247 | 66% |
| FE Electrical and Computer | 1,782 | 70% |
| FE Environmental | 1,063 | 71% |
| FE Industrial and Systems | 259 | 67% |
| FE Mechanical | 5,153 | 73% |
| FE Other Disciplines | 921 | 61% |
FE Civil has the most examinees of any discipline (about 39% of the 16,168 in the table) and sits slightly below the volume-weighted average of about 69%. Within FE Other Disciplines, NCEES also breaks results out by degree; they range from 41% (mining/mineral) to 83% (naval architecture and marine), but several of those groups have fewer than 60 examinees, so one testing period can swing a lot.
Who these pass rates cover (and who they don't)
NCEES reports one group only. To be counted, an examinee must have:
- taken the FE for the first time,
- attended an EAC/ABET-accredited engineering program, and
- taken the exam within 12 months of graduation.
That means repeat takers, people who graduated years ago, and graduates of non-accredited or foreign programs are not in the table. NCEES does not post a separate pass rate for those groups on its FE page. If you see a "repeat taker pass rate" quoted elsewhere, check where it came from. What NCEES does state is that first-time and repeat takers are graded to the same standard.
Worked example: what 66% means in numbers
Using the July 2026 FE Civil row:
- Passed: 6,247 × 0.66 ≈ 4,120 first-time examinees.
- Did not pass: 6,247 − 4,120 ≈ 2,130, roughly one in three. (NCEES rounds the rate to a whole percent, so these counts are approximate.)
- Time per question: the FE gives 5 hours 20 minutes of exam time for 110 questions: 320 ÷ 110 = 2.9 minutes each, so knowing the material is not enough: you also need to solve a typical problem in under 3 minutes.
Practice at that pace with timed FE Civil practice problems, and check beam answers with the shear and bending moment diagram calculator.
How the FE exam is scored
- No published passing score. Your number of correct answers is converted to a scaled score that adjusts for small differences between exam forms, then compared with a minimum ability level set by subject-matter experts.
- No penalty for wrong answers. Never leave a question blank.
- No curve. There is no fixed share of examinees who must pass or fail.
- Pass/fail results in 7–10 days. If you fail, the diagnostic report shows your relative strengths and weaknesses by topic.
Source: NCEES exam scoring.
Retaking the FE exam
NCEES policy allows one attempt per testing window and no more than three attempts in any 12-month period. Your state licensing board may add steps, such as a new application before you rebook. If you failed, study the weakest areas on your diagnostic report first and weight the rest by the question counts in the FE Civil exam specification.
How to be in the 66% who pass
- Study with the real reference. The only book in the exam is the FE Reference Handbook, on screen. Solve every practice problem with the PDF and Ctrl+F.
- Use an approved calculator. Only Casio fx-115/fx-991, HP 33s/35s and TI-30X/TI-36X models are allowed. Practice on the one you will bring, or the online TI-36X Pro.
- Take the exam soon after graduating. The published rates are for people within a year of graduation; the material is freshest then.
- Follow the topic weights. Start from the FE Civil prep hub, which maps each NCEES topic to lessons and problems.
FE Exam Pass Rate FAQ
What is the FE Civil pass rate?
66% in the latest NCEES figures (updated July 2026), from 6,247 first-time examinees who studied at EAC/ABET-accredited programs and tested within 12 months of graduating. NCEES does not publish one overall rate for every FE Civil taker.
What score do you need to pass the FE exam?
NCEES does not publish the passing score. Your number of correct answers is converted to a scaled score and compared with a minimum ability level set by subject-matter experts. There is no penalty for wrong answers, so answer every question.
Is the FE exam curved?
No. NCEES says it scores each exam with no predetermined percentage of examinees who should pass or fail. The pass rate moves with how well the group prepares, not with a quota.
What is the pass rate for repeat takers?
NCEES’s published table only covers first-time takers from accredited programs who test within a year of graduating. Repeat takers are graded to the same standard, but NCEES does not list a separate repeat pass rate on its FE page, so be wary of sites quoting one without a source.
How many times can you take the FE exam?
NCEES policy is one attempt per testing window and no more than three attempts in a 12-month period. Some state boards add their own rules, such as a new application after a failed attempt, so check your board.
How soon do you get FE results?
Usually 7–10 days after the exam, by email, with the result in your MyNCEES account. Results are pass/fail; if you fail you also get a diagnostic report showing your weaker topics.