Format, modules, topic weights and how it differs from the FE (NCEES specifications effective April 2024)
The PE Civil exam (Principles and Practice of Engineering, Civil) is the NCEES exam most civil engineers pass to become a licensed Professional Engineer. It is the step after the FE exam (which makes you an Engineer in Training) and a few years of work experience.
Check the NCEES PE Civil page before you register: NCEES has posted new specifications with updated design standards that take effect in April 2027.
Every module is 80 questions. Older guides describe a 40-question "breadth" morning shared by all civil engineers and a 40-question "depth" afternoon. Under the current specifications each module has a single list of knowledge areas: general civil topics (soil mechanics, materials, project planning) are folded into it with your specialty. Approximate question counts are in brackets.
| Module | Knowledge areas (approx. questions) |
|---|---|
| Construction | Construction operations and methods (9–14), design for support of construction loads (10–15), project planning and scheduling (7–11), quality control (7–11), structural mechanics (7–11), estimating quantities and costs (6–9), soil mechanics (6–9), site layout (5–8), material properties (5–8), hydraulics and hydrology (4–6), health and safety (4–6) |
| Geotechnical | Retaining structures (10–15), deep foundations (10–15), earth structures, ground improvement and pavement (9–14), site characterization (8–12), soil mechanics and lab testing (8–12), shallow foundations (6–9), construction observation and QA/QC (6–9), earthquake engineering (5–8), groundwater and seepage (4–6), problematic soil and rock (4–6) |
| Structural | Component design and detailing (26–39), forces and load effects (17–26), loads and load applications (12–18), materials and material properties (10–15), temporary structures and other topics (5–8) |
| Transportation | Traffic engineering (10–15), horizontal design (8–12), vertical design (8–12), drainage (8–12), roadside and cross-section design (7–11), intersection geometry (7–11), project management (6–9), geotechnical and pavement (6–9), traffic signals (5–8), traffic control design (5–8) |
| Water Resources and Environmental | Project sitework (9–14), hydrology (8–12), closed conduit hydraulics (7–11), open channel hydraulics (7–11), wastewater (7–11), analysis and design (6–9), drinking water (6–9), water quality (5–8), project planning (4–6), materials (4–6), groundwater and wells (4–6), soil mechanics (3–5) |
Pick the module that matches your daily work. The design standards are the biggest difference: Structural, for example, gives you ASCE 7-16, IBC 2018, ACI 318-14, the AISC Steel Construction Manual (15th edition), the AWC NDS 2018 wood package and the AASHTO LRFD bridge specifications. Questions are graded against the editions on the NCEES list, not newer ones.
| FE Civil | PE Civil | |
|---|---|---|
| When | Senior year or right after graduating | After about four years of qualifying experience |
| Questions | 110 | 80 |
| Appointment | 6 hours (5 h 20 min of exam time) | 9 hours (8 h of exam time) |
| Time per question | About 2.9 minutes | About 6 minutes |
| References | FE Reference Handbook only | PE Civil Reference Handbook plus design codes |
| Scope | All of civil engineering, fundamentals level | One module, practice level, code-based design |
The PE gives you twice as long per question because each one is a small design problem: find the governing load combination, run the analysis, then check it against a code. Fundamentals you learned for the FE (shear and moment diagrams, section properties, Rankine earth pressure, hydraulics) are still the first step of most PE questions. If they are rusty, review them with the FE Civil prep pages first.
A simply supported steel floor beam spans 24 ft and carries a uniform dead load of 1.0 kip/ft and live load of 1.5 kip/ft. The compression flange is continuously braced. Using LRFD and A992 steel (Fy = 50 ksi), what plastic section modulus Zx is required?
On the exam you would then check shear and deflection too. Drawing the shear and moment diagrams is where most time goes; practice that step with the shear and bending moment diagram calculator until you can do it by hand in under two minutes, and do the arithmetic on the same approved calculator you will use on exam day (try the online TI-36X Pro).
Not as separate morning and afternoon exams. Since the April 2024 specifications, each civil module has one 80-question specification that mixes general civil topics with module-specific ones. Older study books that describe a 40-question breadth exam plus a 40-question depth exam refer to the earlier format.
No. The exam is closed book with electronic references: the NCEES PE Civil Reference Handbook and the design standards for your module are shown on screen. You cannot bring printed codes or notes.
NCEES charges $400. Your state licensing board may charge its own application fee on top of that.
In most cases, yes: the usual path is FE, then about four years of qualifying experience, then the PE. Eligibility is set by each state licensing board, so check your board’s rules before you register.
Only models on the NCEES approved list, the same list as the FE: Casio fx-115 and fx-991 models, HP 33s and 35s, and TI-30X and TI-36X models.