Beam Midspan Deflection Example
Find how far a simply supported beam sags under a uniform load, a standard FE structural serviceability check.
Problem
A simply supported steel beam spans 8 m and carries a uniform service load of 20 kN/m (including self-weight). and .
The maximum (midspan) deflection is most nearly:
- 4.3 mm
- 21.3 mm
- 34.1 mm
- 204.8 mm
Answer
Show stepsHide steps
Given
- Span:
- Load:
- ,
Step 1: Convert units
Step 2: Numerator
Step 3: Denominator
Step 4: Deflection
Concept
A simply supported beam under a uniform load sags most at midspan. The maximum deflection depends on the load, the span to the fourth power, and the beam stiffness . Because of the fourth power, a small change in span has a large effect.
- Convert units first: kN/m is the same as N/mm, and GPa times 1000 gives MPa (N/mm²).
- Keep in mm and in mm⁴ so the answer comes out in mm.
Beam deflection formulas are in the Mechanics of Materials section of the NCEES FE Reference Handbook. Check your answer with the beam deflection calculator.
Key Formulas
Notation: = uniform load per length, = span, = modulus of elasticity, = moment of inertia.
Common Mistakes
- (A) 4.3 mm: using the fixed-fixed beam formula wL⁴/(384EI), which drops the factor of 5.
- (C) 34.1 mm: treating the total load wL = 160 kN as a midspan point load, PL³/(48EI).
- (D) 204.8 mm: using the cantilever formula wL⁴/(8EI).
- Mixing units: using L in m with E in MPa, or w in kN/m with N and mm, is off by powers of 10.
A common serviceability limit is L/360 = 22.2 mm, so this beam just passes. For the strength check on the same kind of beam, see the bending stress example.