Enter wall length, height and openings to get the number of 8 × 8 × 16 concrete (cinder) blocks, 80 lb bags of mortar and grout for filled cores.
Includes the waste allowance. Mortar default is QUIKRETE Mortar Mix's published yield of 13 blocks per 80 lb bag. Grout per block is an estimate for hollow 8 in units; check your block supplier's data.
Block walls are estimated by face area. A standard block with its mortar joint covers 16 × 8 in, which is 0.889 ft², so:
The 1.125 factor works for any block with an 8 × 16 in face, whether it is 4, 6, 8, 10 or 12 in wide. Width changes the grout and the weight, not the count. To check by courses: an 8 ft wall is 12 courses of 8 in, and a 30 ft wall takes 30 × 12 ÷ 16 = 22.5 blocks per course.
A 30 ft long, 8 ft high wall in standard 8 × 8 × 16 block, with one 3 × 7 ft door. Cores left hollow.
These are the calculator's default inputs. Cross-check: 12 courses × 22.5 blocks = 270 blocks for the full wall, minus the door. Openings also need lintels and bond beams, which are not in this count.
A 20 ft long, 4 ft high reinforced wall, solid grouted, 5% waste.
That much grout is about 43 bags at 0.6 ft³ per 80 lb bag, so order ready-mixed grout or pump it. Use masonry grout to ASTM C476 (fluid, small aggregate), not stiff concrete mix: it has to flow down the cores around the bars. Set Cells grouted to 100 in the calculator to see this case.
The QUIKRETE Mortar Mix data sheet (No. 1102, Type N) says each 80 lb bag lays up to 37 standard bricks or 13 standard 8 × 8 × 16 in blocks. "Up to" means a skilled mason with no waste, so the calculator rounds bags up and you should add your waste percentage. If you mix your own mortar from masonry cement and sand, or use a different brand, enter that product's published yield in the Blocks per 80 lb mortar bag field.
A hollow 8 in block is roughly half void. Its two cores hold about 0.27 ft³ (7.6 L) of grout, or about 100 blocks per cubic yard. This is an estimate: core shape and face-shell thickness vary by manufacturer, so use the supplier's data if you have it and type it into the Grout per solid block field.
Most reinforced walls are not solid grouted. Only the cells with vertical bars, plus bond beam courses, are filled. A block has two cells, so a bar every 48 in grouts 1 cell in 6 (about 17%). Enter that share as Cells grouted. Retaining walls and below-grade walls are often grouted solid; follow the drawings.
Standard 8 × 8 × 16 in block, no waste or openings. Grout is for every cell filled.
| Wall area | Blocks | 80 lb mortar bags | Grout, solid |
|---|---|---|---|
| 50 ft² | 57 | 5 | 0.57 yd³ |
| 100 ft² | 113 | 9 | 1.13 yd³ |
| 200 ft² | 225 | 18 | 2.25 yd³ |
| 500 ft² | 563 | 44 | 5.63 yd³ |
| 1,000 ft² | 1,125 | 87 | 11.25 yd³ |
1.125 standard 8 × 8 × 16 in blocks per square foot of wall, or 112.5 per 100 ft². Each block covers 16 × 8 in = 0.889 ft² of wall face including a 3/8 in mortar joint. In metric, 12.5 blocks per m² for a 400 × 200 mm module.
About 8 bags of 80 lb mortar mix. QUIKRETE publishes up to 13 standard 8 × 8 × 16 in blocks per 80 lb bag of Mortar Mix, so 100 ÷ 13 = 7.7, rounded up. Other brands differ, so check the bag.
In everyday use, yes. True cinder blocks used coal cinders as aggregate and are rarely made today; what stores sell as cinder block is a concrete masonry unit (CMU) made with sand, gravel or lightweight aggregate. The count per wall area is the same.
Roughly 0.27 ft³ per fully grouted 8 in block, or about 1 yd³ per 100 blocks. A wall where every cell is grouted needs about 1.1 yd³ per 100 ft² before waste. This is an estimate; core size varies by manufacturer.
Those are nominal sizes. The actual block is 7-5/8 × 7-5/8 × 15-5/8 in, and the 3/8 in mortar joint brings each block plus joint to a clean 8 by 16 in module. That is why block counts use the nominal size.