Gravel Calculator

Enter length, width and depth to get tons and cubic yards of gravel or crushed stone for a driveway, path or base.

Rectangular area: driveway, path, patio base
11.55tons
10.48 metric tonnes
Cubic yards
8.15
Cubic feet
220.0
Cubic meters
6.23

Includes the compaction and waste allowance. Tons are US short tons (2,000 lb). Densities are typical bulk values; ask your supplier for the weight of their stone and use Custom.

How Much Gravel Do I Need?

Gravel is sold by the ton or by the cubic yard. Find the volume first, then turn it into weight with the density of the stone:

  • Cubic feet: ft³ = length (ft) × width (ft) × depth (in) ÷ 12
  • Cubic yards: yd³ = ft³ ÷ 27
  • Tons: tons = ft³ × density (lb/ft³) ÷ 2,000
  • Metric: m³ = length (m) × width (m) × depth (cm) ÷ 100, and tonnes = m³ × density (kg/m³) ÷ 1,000

A quick rule: one cubic yard of dry gravel weighs about 1.4 tons, and one ton covers about 57 ft² at 4 in deep. Add an allowance for compaction and waste, then round up to what the supplier sells.

Gravel and Crushed Stone Density

Weight per yard is what changes most between materials. The calculator's presets use these bulk densities from Engineering ToolBox (dirt, mud and gravel and bulk materials, crushed limestone taken at the middle of its 85 to 95 lb/ft³ range):

Materiallb/ft³kg/m³lb per yd³Tons per yd³
Gravel, dry1051,6822,8351.42
Gravel, wet1252,0023,3751.69
Crushed limestone901,4422,4301.22
Sand and gravel mix, dry1081,7302,9161.46

These are typical values, not guarantees. Stone type, size, grading and moisture all move the number, and suppliers often quote their own tons-per-yard figure. If they give one, divide it by 27 and multiply by 2,000 to get lb/ft³ (1.5 tons/yd³ is 111 lb/ft³) and enter it as a custom density.

Worked Example: Gravel Driveway, 50 × 12 ft, 4 in Deep

  1. Cubic feet: 50 × 12 × 4 ÷ 12 = 200 ft³
  2. Cubic yards: 200 ÷ 27 = 7.41 yd³
  3. Weight of dry gravel: 200 × 105 = 21,000 lb = 10.5 tons
  4. Add 10% for compaction and waste: 10.5 × 1.10 = 11.55 tons, or 8.15 yd³

Order 12 tons. The same driveway in crushed limestone at 90 lb/ft³ comes to 9.9 tons with the 10% allowance. These are the calculator's default inputs, so you can change one number at a time and see the effect.

Worked Example: Pea Gravel Path, 30 × 3 ft, 3 in Deep

  1. Cubic feet: 30 × 3 × 3 ÷ 12 = 22.5 ft³
  2. Cubic yards: 22.5 ÷ 27 = 0.83 yd³
  3. Weight at 105 lb/ft³: 22.5 × 105 ÷ 2,000 = 1.18 tons

With 5% extra that is 23.6 ft³, or about 1.24 tons. Bagged stone is often sold in 0.5 ft³ bags, so this path would take 48 bags.

How Much Area Does a Ton or a Yard Cover?

Coverage at common depths, for dry gravel at 105 lb/ft³:

Depthft² per tonft² per yd³
2 in114162
3 in76108
4 in5781
6 in3854

One cubic yard is 324 ft² at 1 in deep, so ft² per yd³ is simply 324 ÷ depth in inches.

How Deep Should Gravel Be?

  • Decorative gravel and paths: often 2 to 3 in over landscape fabric.
  • Driveways: commonly 4 to 6 in of compacted crushed stone, and thicker (often in two or three layers, coarse stone at the bottom) on soft ground. Soil conditions decide this, so treat these as typical, not design, values.
  • Base under a concrete slab or pavers: usually 4 in or more of compacted crushed stone. Size the slab itself with the concrete slab calculator.

Ordering Tips

  • For an L-shaped or irregular area, split it into rectangles, run each one and add the tons.
  • Compacted base gets denser than the loose stone in the truck. For engineered fills where a density is specified, check it with the soil compaction calculator.
  • Behind a retaining wall, drainage gravel is part of the design; check the wall itself with the retaining wall calculator.
  • Quantity takeoffs like this one also show up in FE Civil construction engineering problems.

Gravel Calculator FAQ

How many tons of gravel are in a cubic yard?

About 1.4 tons for dry gravel (105 lb/ft³ × 27 = 2,835 lb). Wet gravel is closer to 1.7 tons and crushed limestone about 1.15 to 1.3 tons. The real figure depends on the stone and its size, so ask the supplier.

How much gravel do I need for a driveway?

Multiply length × width × depth in feet to get cubic feet, divide by 27 for cubic yards, and multiply cubic feet by the density for pounds. A 50 × 12 ft driveway 4 in deep is 7.4 yd³, or 10.5 tons of dry gravel before any extra for compaction.

How much area does a ton of gravel cover?

At 105 lb/ft³ one ton is about 19 ft³. Spread 2 in deep it covers about 114 ft², 3 in about 76 ft² and 4 in about 57 ft².

How much extra gravel should I order for compaction?

Quarries sell loose stone, and compacted base settles into a smaller volume. Adding 10 to 15 percent is a common rule of thumb for a compacted driveway base, and 5 percent is usually enough for loose decorative gravel. Treat these as starting points, not code values.

Is crushed stone the same as gravel?

No. Gravel is rounded by water; crushed stone is quarried rock broken into angular pieces. Angular stone locks together when compacted, which is why crushed stone with fines is used for driveway and road base, while rounded pea gravel is used for paths and drainage.

Related tools and topics