Maximum Bending Moment Formulas

Closed-form M max and its location for simply supported, cantilever and fixed beams. Check any other beam in the tool below.

Loading calculator...

Maximum Bending Moment Table

For the most common beams you can get the maximum moment without drawing the full diagram. Each result follows from statics and the load–shear–moment relations in the NCEES FE Reference Handbook (Mechanics of Materials, Beams).

Several loads, overhangs or more than two supports? Use the bending moment diagram calculator: it draws the full SFD and BMD and marks the maximum moment.

Beam and loadMaximum momentLocation
Simply supported, uniform load wwL²/8Midspan
Simply supported, point load P at midspanPL/4Under the load
Simply supported, point load P at distance a (b = L − a)Pab/LUnder the load
Cantilever, uniform load wwL²/2Fixed support
Cantilever, point load P at free endPLFixed support
Fixed-fixed, uniform load wwL²/12 (ends), wL²/24 (midspan)Supports

How to Calculate Bending Moment by Hand

  1. Solve for the support reactions with ΣF = 0 and ΣM = 0.
  2. Cut the beam at a distance x and take moments of everything on one side of the cut. That sum is the internal bending moment M(x).
  3. Set the shear V(x) = dM/dx to zero and solve for x to find where the moment peaks, then substitute back for Mmax.

Worked Examples

Example 1

Simply supported beam with a uniform load

A 6 m beam, pinned at the left end and on a roller at the right, carries 10 kN/m over its full length.

R_A = R_B
30 kN
M_max
45 kN·m
›Solution
  • Reactions: Total load = 10 × 6 = 60 kN, shared equally: R_A = R_B = 30 kN.
  • Shear: Shear starts at +30 kN, falls in a straight line, crosses zero at midspan (3 m) and ends at −30 kN.
  • Moment: Maximum moment is at the zero-shear point: M_max = wL²/8 = 10 × 6² / 8 = 45 kN·m at midspan. The diagram is a parabola.
Open in calculator →
Example 2

Cantilever with a uniform load

A 3 m cantilever, fixed at the left end and free at the right, carries 5 kN/m over its full length.

R
15 kN
M_fixed
22.5 kN·m
›Solution
  • Reactions: Vertical reaction R = 5 × 3 = 15 kN; fixed-end moment M = wL²/2 = 5 × 3² / 2 = 22.5 kN·m.
  • Shear: Shear is 15 kN at the fixed end and falls linearly to zero at the free end.
  • Moment: Moment magnitude is largest at the support, 22.5 kN·m (hogging), and drops to zero at the free tip along a parabola.
Open in calculator →

Fixed-end moments for indeterminate beams are covered in the moment distribution guide.

Maximum Bending Moment FAQ

What is the maximum bending moment of a simply supported beam?

+

For a uniform load w over span L it is wL²/8 at midspan. For a single point load P at midspan it is PL/4 under the load.

What is the maximum bending moment of a cantilever?

+

It occurs at the fixed support: wL²/2 for a uniform load and PL for a point load at the free end.

Where does the maximum bending moment occur?

+

At a point where the shear force is zero or changes sign, or at a support (for cantilevers and over interior supports of continuous beams).

What units is bending moment in?

+

Force times length: N·m or kN·m in SI, and lb·ft, kip·ft or kip·in in US customary units.

How is bending moment used to size a beam?

+

The bending stress is σ = Mc/I = M/S, so the required section modulus is S = M_max / σ_allow. Larger moments need deeper or heavier sections.

Related

More free calculators